Description
Wheel Guide Alignment Tool (M14x1.25) is available at NP RACE. Wheel Guide Alignment Tool (M14x1.25) is a DriftShop Wheels for Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru, Audi and other chassis we stock. SKU M4WGB.
Wheel Guide Alignment Tool (M14x1.25) sits in our performance catalogue for Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru and Audi builders. The listing is kept with brand, type and stock identity so you can order the correct piece, not a lookalike.
NP RACE is based at Miško g. 1, Ilgakiemis, Kauno r. sav., Lithuania. Wheel Guide Alignment Tool (M14x1.25) can be reserved for collection or packed for dispatch after a quick fitment check.
Product specifications
Wheel Guide Alignment Tool Specifications This handy tool makes wheel changes easier on vehicles featuring studless hubs. This task is even more difficult when the vehicle is fitted with spacers: aligning the hub the spacer and the wheel in order to get the first lug bolt in can be a real nightmare! Preserve your back! Thanks to this guide you no longer have to hold the wheel between your legs during this operation trying as hard as you can to guess where those pesky holes are in order to get the first lug bolt through. Simply mount the wheel on the guide which takes care of supporting and aligning it to the hub then place and tighten the wheel bolts. Also known as a wheel hanger this guide has a knurled and drilled end for easy tightening or loosening by hand or by inserting a tool. It is suitable for all vehicles with wheel bolts featuring M14x1.25 thread (BMW Porsche Mercedes Audi Volkswagen Seat Skoda…). How to use Screw the guide into one of the lug holes closest to the 12 o’clock position. Align and put the wheel on the hub by passing one of the holes through the guide. Tighten the wheel using the other bolts. Take the guide off. Install and tighten the last bolt. Put the vehicle back on the ground. Tighten the bolts using factory torque specs.
Wheel Guide Alignment Tool (M14x1.25) details
For semi-slick or heavy track tyres, check inner clearance over coilovers, arches and brake kits already on the car. Wheel Guide Alignment Tool (M14x1.25) is stored against SKU M4WGB so the same item can be re-ordered without guessing the title.
Offset, centre bore and load rating have to match the hub and the intended tyre. This Wheels is listed with that fitment discipline in mind.
Spacers, studs and hub-centric rings are easy to get wrong. We would rather confirm PCD and thickness than send a part that moves the wheel into the arch.
Fitment for this Wheels
This listing is not locked to one chassis. We still ask for make, model, year and engine before we confirm Wheel Guide Alignment Tool (M14x1.25), because universal parts often need a specific length, thread or offset.
Bring photos of the mounting points, a VIN if the supplier uses one, and the parts already next to this Wheels. That is how we avoid a return on a part that was only “close”.
If you are building a drift, time-attack or club-race car, say so. Duty cycle changes the recommendation even when the bolt pattern matches.
Why order Wheel Guide Alignment Tool (M14x1.25) from NP RACE
The catalogue covers more than one brand on purpose: Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru, Audi and specialist chassis share the same shop instead of five different stores. Wheel Guide Alignment Tool (M14x1.25) is one line in that shelf.
You can filter the same Wheels family by car or brand in the NP RACE shop, then keep this SKU in the order notes. Related hardware — lines, bushes, gaskets, fluids — can go in the same shipment from Ilgakiemis.
Stock moves. If Wheel Guide Alignment Tool (M14x1.25) is listed, we treat it as an orderable line and tell you when a supplier lead time applies. We do not hide the SKU behind a contact form.
Shipping, support and installation notes
Orders leave Lithuania packed for road or air. Heavy kits and long Wheels pieces may ship in more than one carton. Ask for a crate if the part is a caliper set, a cage or a full exhaust.
Need a fitment check before you pay? Call +370 608 41554 or write to sales@nprace.com with the SKU M4WGB and the car. The contact page is the same inbox.
Installation should follow the brand instructions for DriftShop. Torque, thread locker, bedding and break-in are on you or your workshop. We will pass on any supplier bulletin attached to Wheel Guide Alignment Tool (M14x1.25).
Returns only work if the part is unused and the SKU matches the delivery. Custom-cut or fluid-filled items are confirmed before they leave the shelf.
Keep this page for the spec of Wheel Guide Alignment Tool (M14x1.25). If we update photos or notes, the SKU M4WGB stays the identity of Wheel Guide Alignment Tool (M14x1.25) in the NP RACE catalogue.