Description
Camber / Knuckles / Angle Honda Accord is available at NP RACE. Hardrace Adjustable Camber Kit (Front Upper Wishbones) for Honda Accord CP / CU / CS (08-15) is a Hardrace Camber / Knuckles / Angle for Honda Accord. SKU HR-7591.
Camber / Knuckles / Angle Honda Accord sits in our performance catalogue for Honda Accord owners and other chassis we support. The listing is kept with brand, type and stock identity so you can order the correct piece, not a lookalike.
NP RACE is based at Miško g. 1, Ilgakiemis, Kauno r. sav., Lithuania. Camber / Knuckles / Angle Honda Accord can be reserved for collection or packed for dispatch after a quick fitment check.
Product specifications
Hardrace Adjustable Camber Kit SpecificationsThese camber kits allow you to precisely adjust the camber of the rear wheels. They are installed in place of the original parts and are equipped with uprated bushes guaranteeing a rigid assembly and ultra-precise adjustment.These adjustable arms offer a wide range of adjustment both positive and negative. When lowering a vehicle the wheels naturally take on camber. With these adjustable arms you can put your rear wheels back “flat” thus limiting premature wear on the tires inside. You also have the option of accentuating the original camber to lower the vehicle further or to install wider wheels.Application List Honda Accord Sedan 2008-2011 2.0i Honda Accord Sedan 2008-2011 2.2i-DTEC Honda Accord Sedan 2008-2011 2.4i Honda Accord Sedan 2011-2015 2.0i Honda Accord Sedan 2011-2015 2.2i-DTEC Honda Accord Sedan 2011-2015 2.2i-DTEC180 Honda Accord Sedan 2011-2015 2.4i Honda Accord Tourer 2008-2011 2.0i Honda Accord Tourer 2008-2011 2.2i-DTEC Honda Accord Tourer 2008-2011 2.4i Honda Accord Tourer 2011-2015 2.0i Honda Accord Tourer 2011-2015 2.2i-DTEC Honda Accord Tourer 2011-2015 2.2i-DTEC180 Honda Accord Tourer 2011-2015 2.4i
Camber / Knuckles / Angle Honda Accord details
Track days, drift practice and fast road use all punish weak mounts and tired OEM links. A correctly specified Camber / Knuckles / Angle keeps alignment in the window you set. Camber / Knuckles / Angle Honda Accord is stored against SKU HR-7591 so the same item can be re-ordered without guessing the title.
This Camber / Knuckles / Angle is chosen when a car needs more predictable load transfer, cleaner mid-corner balance and a setup that still works on the road to the circuit.
Geometry, spring rate and damping have to match the tyre, the track and the driver. We help you check ride height, bump steer and clearance before the part leaves Ilgakiemis.
Fitment for this Camber / Knuckles / Angle
This listing is tagged for Honda Accord. Generation, engine code, LHD/RHD and existing modifications can still change brackets, length or calibration. If your Honda Accord is not stock, send the current spec when you ask about Camber / Knuckles / Angle Honda Accord.
Bring photos of the mounting points, a VIN if the supplier uses one, and the parts already next to this Camber / Knuckles / Angle. That is how we avoid a return on a part that was only “close”.
If you are building a drift, time-attack or club-race car, say so. Duty cycle changes the recommendation even when the bolt pattern matches.
Why order Camber / Knuckles / Angle Honda Accord from NP RACE
The catalogue covers more than one brand on purpose: Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru, Audi and specialist chassis share the same shop instead of five different stores. Camber / Knuckles / Angle Honda Accord is one line in that shelf.
You can filter the same Camber / Knuckles / Angle family by car or brand in the NP RACE shop, then keep this SKU in the order notes. Related hardware — lines, bushes, gaskets, fluids — can go in the same shipment from Ilgakiemis.
Stock moves. If Camber / Knuckles / Angle Honda Accord is listed, we treat it as an orderable line and tell you when a supplier lead time applies. We do not hide the SKU behind a contact form.
Shipping, support and installation notes
Orders leave Lithuania packed for road or air. Heavy kits and long Camber / Knuckles / Angle pieces may ship in more than one carton. Ask for a crate if the part is a caliper set, a cage or a full exhaust.
Need a fitment check before you pay? Call +370 608 41554 or write to sales@nprace.com with the SKU HR-7591 and the car. The contact page is the same inbox.
Installation should follow the brand instructions for Hardrace. Torque, thread locker, bedding and break-in are on you or your workshop. We will pass on any supplier bulletin attached to Camber / Knuckles / Angle Honda Accord.
Returns only work if the part is unused and the SKU matches the delivery. Custom-cut or fluid-filled items are confirmed before they leave the shelf.
Keep this page for the spec of Hardrace Adjustable Camber Kit (Front Upper Wishbones) for Honda Accord CP / CU / CS (08-15). If we update photos or notes, the SKU HR-7591 stays the identity of Camber / Knuckles / Angle Honda Accord in the NP RACE catalogue.