Description
4×100 Hubcentric "Slip On" Wheel is available at NP RACE. 4×100 Hubcentric "Slip On" Wheel Spacers – 5 mm (CB 57.1 mm) is a DriftShop Spacers / Hubware for Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru, Audi and other chassis we stock. SKU ET_4x100/57.1/5MM.
4×100 Hubcentric "Slip On" Wheel sits in our performance catalogue for Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru and Audi builders. The listing is kept with brand, type and stock identity so you can order the correct piece, not a lookalike.
NP RACE is based at Miško g. 1, Ilgakiemis, Kauno r. sav., Lithuania. 4×100 Hubcentric "Slip On" Wheel can be reserved for collection or packed for dispatch after a quick fitment check.
Product specifications
Specially designed for the vehicles listed below these spacers allow your track width to gain a few extra millimeters. Whether it be for pushing the rim away from the calipers or suspension to avoid rubbing or simply to improve the look of your vehicle they can be quickly and easily installed providing reliable fitment without any vibrations thanks to the center bore which is the perfect size for your vehicle. In most cases these spacers can be used with the OEM bolts or studs as they are usually long enough. No modification is required. If in doubt about the safety of your fitment be sure to check with a professional before installing. Compatible with (non-exhaustive) BMW 3 Series E21 (1975-1982) BMW 3 Series E30 exc. M3 (1982-1990) Seat Arosa (1997-2005) Seat Cordoba (1993-2002) Seat Ibiza (1993-2002) Seat Inca (1995-2003) Seat Mii (2012+) Seat Toledo (1991-1998) Skoda Citigo (2012+) Skoda Felicia (1994-2000) Skoda Felicia Pickup (1996-2000) Volkswagen Caddy (1996-2003) Volkswagen Corrado (1988-1996) Volkswagen Cross Up (2013+) Volkswagen e-Up (2013+) Volkswagen Golf 1 (1974-1983) Volkswagen Golf 2 (1983-1992) Volkswagen Golf 3 (1991-1997) Volkswagen Jetta (1985-1991) Volkswagen Lupo (1998-2005) Volkswagen Lupo GTI (2002-2005) Volkswagen Passat (1983-1996) Volkswagen Polo (1994-2001) Volkswagen Scirocco II (1981-1992) Volkswagen Up (2011+) Volkswagen Vento (1992-1998) Volkswagen XL1 (2015+)
4×100 Hubcentric "Slip On" Wheel details
Spacers, studs and hub-centric rings are easy to get wrong. We would rather confirm PCD and thickness than send a part that moves the wheel into the arch. 4×100 Hubcentric "Slip On" Wheel is stored against SKU ET_4x100/57.1/5MM so the same item can be re-ordered without guessing the title.
For semi-slick or heavy track tyres, check inner clearance over coilovers, arches and brake kits already on the car.
Offset, centre bore and load rating have to match the hub and the intended tyre. This Spacers / Hubware is listed with that fitment discipline in mind.
Fitment for this Spacers / Hubware
This listing is not locked to one chassis. We still ask for make, model, year and engine before we confirm 4×100 Hubcentric "Slip On" Wheel, because universal parts often need a specific length, thread or offset.
Bring photos of the mounting points, a VIN if the supplier uses one, and the parts already next to this Spacers / Hubware. That is how we avoid a return on a part that was only “close”.
If you are building a drift, time-attack or club-race car, say so. Duty cycle changes the recommendation even when the bolt pattern matches.
Why order 4×100 Hubcentric "Slip On" Wheel from NP RACE
The catalogue covers more than one brand on purpose: Honda, BMW, Nissan, Toyota, Mazda, Volkswagen, Ford, Subaru, Audi and specialist chassis share the same shop instead of five different stores. 4×100 Hubcentric "Slip On" Wheel is one line in that shelf.
You can filter the same Spacers / Hubware family by car or brand in the NP RACE shop, then keep this SKU in the order notes. Related hardware — lines, bushes, gaskets, fluids — can go in the same shipment from Ilgakiemis.
Stock moves. If 4×100 Hubcentric "Slip On" Wheel is listed, we treat it as an orderable line and tell you when a supplier lead time applies. We do not hide the SKU behind a contact form.
Shipping, support and installation notes
Orders leave Lithuania packed for road or air. Heavy kits and long Spacers / Hubware pieces may ship in more than one carton. Ask for a crate if the part is a caliper set, a cage or a full exhaust.
Need a fitment check before you pay? Call +370 608 41554 or write to sales@nprace.com with the SKU ET_4x100/57.1/5MM and the car. The contact page is the same inbox.
Installation should follow the brand instructions for DriftShop. Torque, thread locker, bedding and break-in are on you or your workshop. We will pass on any supplier bulletin attached to 4×100 Hubcentric "Slip On" Wheel.
Returns only work if the part is unused and the SKU matches the delivery. Custom-cut or fluid-filled items are confirmed before they leave the shelf.
Keep this page for the spec of 4×100 Hubcentric "Slip On" Wheel Spacers – 5 mm (CB 57.1 mm). If we update photos or notes, the SKU ET_4x100/57.1/5MM stays the identity of 4×100 Hubcentric "Slip On" Wheel in the NP RACE catalogue.